天天视频成人,国产精品第一,色欧美99

java.lang.Object
- net.posprinter.utils.DataForSendToPrinterTSC

```
public class DataForSendToPrinterTSC
extends java.lang.Object
```
作者:

chensong
本類為指令處理工具類。該類處理的指令只適用于條碼打印機系列的產品；具體指令的描述和效果請參考編程手冊TSC條碼打印機指令TSPL手冊.pdf

構造器概要

構造器
構造器和說明

DataForSendToPrinterTSC()

構造器
構造器和說明
`DataForSendToPrinterTSC()`

方法概要

方法
限定符和類型	方法和說明
`static byte[]`	`autoDetect(int x, int y)` This command feeds the paper through the gap/black mark sensor in an effort to determine the paper and gap/black mark sizes, respectively.
`static byte[]`	`backFeed(int n)` This command feeds the label in reverse.
`static byte[]`	`bar(int x, int y, int width, int heigth)` 在標籤上畫線 This command draws a bar on the label format.
`static byte[]`	`barCode(int x, int y, java.lang.String codeType, int heigth, int human, int rotation, int narrow, int wide, java.lang.String content)` 該指令用來畫一維條螞，共計 23 種詳細注解請查看編程手冊 This command prints 1D barcodes.
`static byte[]`	`bitmap(int x, int y, int mode, Bitmap bitmap, BitmapToByteData.BmpType bmpType)` 該指令用於在標籤上繪製點陣圖(非 BMP 格式圖檔) This command draws bitmap images (as opposed to BMP graphic files).
`static byte[]`	`blineBydot(int m, int n)` 該指令用于設定黑標的高度及偏移位置 This command sets the height of the black line and the user-defined extra label feeding length each form feed takes.
`static byte[]`	`blineByinch(double m, double n)` 該指令用于設定黑標的高度及偏移位置 This command sets the height of the black line and the user-defined extra label feeding length each form feed takes.
`static byte[]`	`blineBymm(double m, double n)` 該指令用于設定黑標的高度及偏移位置 This command sets the height of the black line and the user-defined extra label feeding length each form feed takes.
`static byte[]`	`blineDetect(int x, int y)` This command feeds the paper through the black mark sensor in an effort to determine the paper and black mark sizes, respectively.
`static byte[]`	`block(int x, int y, int width, int height, java.lang.String font, int rotation, int x_multiplication, int y_multiplication, int space, int alignment, java.lang.String content)` This command prints paragraph on label.
`static byte[]`	`block(int x, int y, int width, int height, java.lang.String font, int rotation, int x_multiplication, int y_multiplication, java.lang.String content)` This command prints paragraph on label.
`static byte[]`	`box(int x, int y, int x_end, int y_end, int thickness)` 該指令用于在標簽上繪制矩形 This command draws rectangles on the labe BOX x,y,x_end,y_end,line thickness[,radius] 詳細介紹請參考編程手冊
`static byte[]`	`checkPrinterStateByPort4000()` 此指令使用于4000端口，發一次，打印機返回一次代表狀態的數據
`static byte[]`	`checkPrinterStateByPort9100()` This command obtains the printer status at any time, even in the event of printer error.
`static byte[]`	`cls()` 該指令用於清除影像緩衝區(image buffer)的資料 This command clears the image buffer.
`static byte[]`	`codeBlockFMode(int x, int y, int rotation, int row_height, int module_width, java.lang.String content)` This command draws CODABLOCK F mode barcode.
`static byte[]`	`codePage(java.lang.String n)` 該指令用於定義可攜式鍵盤(選配，KP-200)每個字母按鍵所對應的國際字元集 CODEPAGE n
`static byte[]`	`country(java.lang.String n)` 該指令用於設定可攜式鍵盤(選配，KP-200)LCD 因國　的不同而顯示所需的字元 This command orients the keyboard for use in different countries via defining special characters on the KP-200 series portable LCD keyboard (option).
`static byte[]`	`cut()` 使用該指令時，打印機將立即裁切 This command activates the cutter to immediately cut the labels without back feeding the label.
`static byte[]`	`delay(int ms)` Let the printer wait specific period of time then go on next command.
`static byte[]`	`density(int n)` This command sets the printing darkness DENSITY n
`static byte[]`	`direction(int n)` 該指令用於定義打印時出紙的方向 This command defines the printout direction and mirror image.
`static byte[]`	`disPlay(java.lang.String s)` This command can show the image, which is in printer’s image buffer, on LCD panel DISPLAY IMAGE/OFF
`static byte[]`	`dmatrix(int x, int y, int width, int height, int xm, int row, int col, java.lang.String expression, java.lang.String content)` 該指令用來繪製 DataMatrix 二維條碼 DMATRIX x, y, width, height, [xm, row, col], expression
`static byte[]`	`dmatrix(int x, int y, int width, int height, java.lang.String expression, java.lang.String content)`
`static byte[]`	`downLoad(java.lang.String filename)` Download 程序文檔 DOWNLOAD ”EXAMPLE.BAS”
`static byte[]`	`downLoad(java.lang.String filename, Bitmap bitmap)` Download 圖檔 DOWNLOAD ”FILENAME.PCX” ,FILE SIZE,DATA　CONTENT...
`static byte[]`	`downLoad(java.lang.String filename, int size, java.lang.String content)` Download 文本文檔 DOWNLOAD ”FILENAME” ,DATA SIZE,DATA　CONTENT...
`static byte[]`	`downLoad(java.lang.String filename, java.lang.String filepath)` Download 文本文件 DOWNLOAD ”FILENAME” ,FILE SIZE,DATA　CONTENT...
`static byte[]`	`ellipse(int x, int y, int width, int height, int thickness)` This command draws an ellipse on the label.
`static byte[]`	`eoj()` Let the printer wait until process of commands (before EOJ) be finished then go on the next command.
`static byte[]`	`eop()` End of program.
`static byte[]`	`erase(int x, int y, int width, int height)` 該指令用於　除影像緩衝區　部份區域的資料 This command clears a specified region in the image buffer.
`static byte[]`	`feed(int n)` 該指令用於控制進紙的距離，以點(dot)表示 This command feeds label with the specified length.
`static byte[]`	`files()` This command prints out the total memory size, available memory size and files lists (or lists the files through RS-232) in the printer memory (both FLASH memory and DRAM).
`static byte[]`	`formFeed()` 該指令可命令打印機進一張紙 This command feeds label to the beginning of next label
`static byte[]`	`gapBydot(int m, int n)` 該指令定義兩張標簽紙間的垂直間距距離 Defines the gap distance between two labels.
`static byte[]`	`gapByinch(double m, double n)` 該指令定義兩張標簽紙間的垂直間距距離 Defines the gap distance between two labels.
`static byte[]`	`gapBymm(double m, double n)` 該指令定義兩張標簽紙間的垂直間距距離 Defines the gap distance between two labels .
`static byte[]`	`gapDetect()` This command feeds the paper through the gap sensor in an effort to determine the paper and gap sizes, respectively.
`static byte[]`	`gapDetect(int x, int y)` This command feeds the paper through the gap sensor in an effort to determine the paper and gap sizes, respectively.
`static byte[]`	`home()` 一般開機後打印第一張標籤時，打印位置都會不準確，打印第二張標籤時打印位置就會正確，若要開機後第一張標籤就要打印在正確的位置，可使用該指令 This command will feed label until the internal sensor has determined the origin.
`static byte[]`	`initialPrinter()` This command can restore printer settings to defaults.
`static byte[]`	`kill(java.lang.String filename)` This command deletes a file in the printer memory.
`static byte[]`	`limitFeedBydot(int n)` 該指令用於設定打印機進紙時，若經過所設定的長度仍無法偵測到垂直間距，則打印機發生錯誤，停止進紙 LIMITFEED n
`static byte[]`	`limitFeedByinch(double n)` 該指令用於設定打印機進紙時，若經過所設定的長度仍無法偵測到垂直間距，則打印機發生錯誤，停止進紙 LIMITFEED n
`static byte[]`	`limitFeedBymm(double n)` 該指令用於設定打印機進紙時，若經過所設定的長度仍無法偵測到垂直間距，則打印機發生錯誤，停止進紙 LIMITFEED n
`static byte[]`	`move()` This command moves downloaded files from DRAM to FLASH memory.
`static byte[]`	`offSetBydot(int m)` 該指令用於控制在剝離模式時(pee-off mode)每張標籤停止的位置，該指令僅適用於剝離模式。
`static byte[]`	`offSetByinch(double m)` 該指令用於控制在剝離模式時(pee-off mode)每張標籤停止的位置，該指令僅適用於剝離模式。
`static byte[]`	`offSetBymm(double m)` 該指令用於控制在剝離模式時(pee-off mode)每張標籤停止的位置，該指令僅適用於剝離模式。
`static byte[]`	`pdf417(int x, int y, int width, int height, int rotate, java.lang.String option, java.lang.String content)` 該指令用來打印 PDF417 二維條碼 This command defines a PDF417 2D bar code.
`static byte[]`	`print(int m)` 該指令用於打印出儲存於影像緩衝區　的資料 This command prints the label format currently stored in the image buffer.
`static byte[]`	`print(int m, int n)` 該指令用於打印出儲存於影像緩衝區　的資料 This command prints the label format currently stored in the image buffer.
`static byte[]`	`putBmp(int x, int y, java.lang.String filename)` This command prints BMP format images.
`static byte[]`	`putBmp(int x, int y, java.lang.String filename, int bpp, int contrast)` This command prints BMP format images.
`static byte[]`	`putpcx(int x, int y, java.lang.String filename)` This command prints PCX format images.
`static byte[]`	`qrCode(int x, int y, java.lang.String eccLevel, int cellWidth, java.lang.String mode, int rotation, java.lang.String content)` This command prints QR code.
`static byte[]`	`qrCode(int x, int y, java.lang.String eccLevel, int cellWidth, java.lang.String mode, int rotation, java.lang.String model, java.lang.String mask, java.lang.String content)` This command prints QR code.
`static byte[]`	`reference(int x, int y)` 該指令用於定義標籤的參考座標原點 This command defines the reference point of the label.
`static byte[]`	`reverse(int x, int y, int width, int height)` This command reverses a region in image buffer.
`static byte[]`	`run(java.lang.String filename)` This command executes a program resident in the printer memory.
`static byte[]`	`selfTest()` At this command, the printer will print out the printer information SELFTEST [page]
`static byte[]`	`selfTest(java.lang.String page)` At this command, the printer will print out the printer information SELFTEST [page]
`static void`	`setCharsetName(java.lang.String charset)` 設置將打印內容傳輸給打印機所采用的字符編碼，默認為中文編碼“gbk”
`static byte[]`	`shift(int n)` This command moves the label’s vertical position.
`static byte[]`	`sizeBydot(int m, int n)` 該指令用于設定標簽紙的寬度及長度 This command defines the label width and length.
`static byte[]`	`sizeByinch(double m, double n)` 該指令用于設定標簽紙的寬度及長度 This command defines the label width and length.
`static byte[]`	`sizeBymm(double m, double n)` 該指令用于設定標簽紙的寬度及高度 This command defines the label width and length.
`static byte[]`	`sound(int level, int interval)` 該指令用於控制蜂鳴器的頻率，可設定 10 階的聲音，每階聲因的長短由第二個參數控制 This command controls the sound frequency of the beeper.
`static byte[]`	`speed(double n)` 該指令用於控制在剝離模式時(pee-off mode)每張標籤停止的位置，該指令僅適用於剝離模式 This command defines the print speed SPEED n
`static byte[]`	`text(int x, int y, java.lang.String font, int rotation, int x_multiplication, int y_multiplication, java.lang.String content)` This command prints text on label.

從類繼承的方法 java.lang.Object
equals, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

- 構造器詳細資料
  - DataForSendToPrinterTSC
```
public DataForSendToPrinterTSC()
```
- 方法詳細資料
  - setCharsetName
```
public static void setCharsetName(java.lang.String charset)
```
    設置將打印內容傳輸給打印機所采用的字符編碼，默認為中文編碼“gbk”
    
    參數:
    charset - 字符編碼類型（打印機所能識別的字符編碼類型，具體請參考編程手冊代碼頁設置）
  - sizeBymm
```
public static byte[] sizeBymm(double m,
              double n)
```
    該指令用于設定標簽紙的寬度及高度 This command defines the label width and length.
    SIZE m mm,n mm
    
    參數:
    m - ,Label width (inch/ mm/ dot)
    n - ,Label length (inch/ mm/ dot)
    
    返回:
    byte[]
  - sizeByinch
```
public static byte[] sizeByinch(double m,
                double n)
```
    該指令用于設定標簽紙的寬度及長度 This command defines the label width and length.
    SIZE m mm,n mm
    
    參數:
    m - ,Label width (inch/ mm/ dot)
    n - ,Label length (inch/ mm/ dot)
    
    返回:
    byte[]
  - sizeBydot
```
public static byte[] sizeBydot(int m,
               int n)
```
    該指令用于設定標簽紙的寬度及長度 This command defines the label width and length.
    SIZE m mm,n mm
    
    參數:
    m - ,Label width (inch/ mm/ dot)
    n - ,Label length (inch/ mm/ dot)
    
    返回:
    byte[]
  - gapByinch
```
public static byte[] gapByinch(double m,
               double n)
```
    該指令定義兩張標簽紙間的垂直間距距離 Defines the gap distance between two labels.
    GAP m,n
    
    參數:
    m,The - gap distance between two labels
    0 ≤ m ≤1 (inch), 0 ≤ m ≤ 25.4 (mm)
    0 ≤ m ≤5 (inch), 0 ≤ m ≤ 127 (mm) / since V6.21 EZ and later firmware
    n,The - offset distance of the gap
    n ≤ label length (inch or mm)
    
    返回:
    byte[]
  - gapBymm
```
public static byte[] gapBymm(double m,
             double n)
```
    該指令定義兩張標簽紙間的垂直間距距離 Defines the gap distance between two labels
    . GAP m,n
    
    參數:
    m,The - gap distance between two labels
    0 ≤ m ≤1 (inch), 0 ≤ m ≤ 25.4 (mm)
    0 ≤ m ≤5 (inch), 0 ≤ m ≤ 127 (mm) / since V6.21 EZ and later firmware
    n,The - offset distance of the gap
    n ≤ label length (inch or mm)
    
    返回:
    byte[]
  - gapBydot
```
public static byte[] gapBydot(int m,
              int n)
```
    該指令定義兩張標簽紙間的垂直間距距離 Defines the gap distance between two labels.
    GAP m,n
    
    參數:
    m - The gap distance between two labels,0 ≤ m ≤1 (inch), 0 ≤ m ≤ 25.4 (mm)
    0 ≤ m ≤5 (inch), 0 ≤ m ≤ 127 (mm) / since V6.21 EZ and later firmware
    n - The offset distance of the gap
    n ≤ label length (inch or mm)
    
    返回:
    byte[]
  - gapDetect
```
public static byte[] gapDetect(int x,
               int y)
```
    This command feeds the paper through the gap sensor in an effort to determine the paper and gap sizes, respectively. This command references the user’s approximate measurements. If the measurements conflict with the actual size, the GAPDETECT command will not work properly. This calibration method can be applied to the labels with pre-printed logos or texts.
    
    參數:
    x - Paper length (in dots)
    y - Gap length (in dots)
    
    返回:
    byte[]
  - gapDetect
```
public static byte[] gapDetect()
```
    This command feeds the paper through the gap sensor in an effort to determine the paper and gap sizes, respectively. This command references the user’s approximate measurements. If the measurements conflict with the actual size, the GAPDETECT command will not work properly. This calibration method can be applied to the labels with pre-printed logos or texts.
    
    參數:
    X - Paper length (in dots)
    Y - Gap length (in dots)
    
    返回:
    byte[]
  - blineDetect
```
public static byte[] blineDetect(int x,
                 int y)
```
    This command feeds the paper through the black mark sensor in an effort to determine the paper and black mark sizes, respectively. This command references the user’s approximate measurements. If the measurements conflict with the actual size, the BLINEDETECT command will not work properly. This calibration method can be applied to the labels with pre-printed logos or texts.
    
    參數:
    X - Paper length (in dots)
    Y - Gap length (in dots)
    
    返回:
    byte[]
  - autoDetect
```
public static byte[] autoDetect(int x,
                int y)
```
    This command feeds the paper through the gap/black mark sensor in an effort to determine the paper and gap/black mark sizes, respectively. This command references the user’s approximate measurements. If the measurements conflict with the actual size, the AUTODETECT command will not work properly. This calibration method can be applied to the labels with pre-printed logos or texts.
    
    參數:
    X - Paper length (in dots)
    Y - Gap length (in dots)
    
    返回:
    byte[]
  - blineByinch
```
public static byte[] blineByinch(double m,
                 double n)
```
    該指令用于設定黑標的高度及偏移位置 This command sets the height of the black line and the user-defined extra label feeding length each form feed takes.
    BLINE m,n
    
    參數:
    m - The height of black line either in inch or mm
    0 ≤ m ≤ 1 (inch), 0 ≤ m ≤ 25.4 (mm) 0 ≤ m ≤5 (inch), 0 ≤ m ≤ 127 (mm) / since V6.21 EZ and later firmware
    n - The extra label feeding length
    0 ≤ n ≤ label length
    
    返回:
    byte[]
  - blineBymm
```
public static byte[] blineBymm(double m,
               double n)
```
    該指令用于設定黑標的高度及偏移位置 This command sets the height of the black line and the user-defined extra label feeding length each form feed takes.
    BLINE m dot,n dot
    
    參數:
    m - The height of black line either in inch or mm
    0 ≤ m ≤ 1 (inch), 0 ≤ m ≤ 25.4 (mm)
    0 ≤ m ≤5 (inch), 0 ≤ m ≤ 127 (mm) / since V6.21 EZ and later firmware
    n - The extra label feeding length
    0 ≤ n ≤ label length
    
    返回:
    byte[]
  - blineBydot
```
public static byte[] blineBydot(int m,
                int n)
```
    該指令用于設定黑標的高度及偏移位置 This command sets the height of the black line and the user-defined extra label feeding length each form feed takes.
    BLINE m mm,n mm
    
    參數:
    m - The height of black line either in inch or mm
    0 ≤ m ≤ 1 (inch), 0 ≤ m ≤ 25.4 (mm)
    0 ≤ m ≤5 (inch), 0 ≤ m ≤ 127 (mm) / since V6.21 EZ and later firmware
    n - The extra label feeding length
    0 ≤ n ≤ label length
    
    返回:
    byte[]
  - offSetByinch
```
public static byte[] offSetByinch(double m)
```
    該指令用於控制在剝離模式時(pee-off mode)每張標籤停止的位置，該指令僅適用於剝離模式。
    OFFSET m
    
    參數:
    mThe - offset distance (inch or mm)
    -1 ≤ m ≤ 1 (inch)
    
    返回:
    byte[]
  - offSetBymm
```
public static byte[] offSetBymm(double m)
```
    該指令用於控制在剝離模式時(pee-off mode)每張標籤停止的位置，該指令僅適用於剝離模式。
    OFFSET m
    
    參數:
    mThe - offset distance (inch or mm)
    -1 ≤ m ≤ 1 (inch)
    
    返回:
    byte[]
  - offSetBydot
```
public static byte[] offSetBydot(int m)
```
    該指令用於控制在剝離模式時(pee-off mode)每張標籤停止的位置，該指令僅適用於剝離模式。
    OFFSET m
    
    參數:
    mThe - offset distance (inch or mm)
    -1 ≤ m ≤ 1 (inch)
    
    返回:
    byte[]
  - speed
```
public static byte[] speed(double n)
```
    該指令用於控制在剝離模式時(pee-off mode)每張標籤停止的位置，該指令僅適用於剝離模式
    This command defines the print speed
    SPEED n
    
    參數:
    n - Printing speed in inch per second 1
    返回:
    byte[]
  - density
```
public static byte[] density(int n)
```
    This command sets the printing darkness
    DENSITY n
    
    參數:
    n - 0~15
    0: specifies the lightest level
    15: specifies the darkest level
    
    返回:
    byte[]
  - direction
```
public static byte[] direction(int n)
```
    該指令用於定義打印時出紙的方向
    This command defines the printout direction and mirror image. This will be stored in the printermemory.
    DIRECTION n[,m]
    
    參數:
    n - 0 or 1. Please refer to the illustrations below
    
    返回:
    byte[]
  - reference
```
public static byte[] reference(int x,
               int y)
```
    該指令用於定義標籤的參考座標原點
    This command defines the reference point of the label. The reference (origin) point varies with the print direction, as shown:
    REFERENCE x, y
    
    參數:
    x - Horizontal coordinate (in dots)
    y - Vertical coordinate (in dots)
    
    返回:
    byte[]
  - shift
```
public static byte[] shift(int n)
```
    This command moves the label’s vertical position. A positive value moves the label further from the printing direction; a negative value moves the label towards the printing direction. For a visual representation, see next page.
    SHIFT n
    
    參數:
    n - The maximum value is 1 inch. For 200 dpi printers, the range is –203 to 203; for 300 dpi printers, the range is –300 to 300. The unit is dot.
    
    返回:
    byte[]
  - country
```
public static byte[] country(java.lang.String n)
```
    該指令用於設定可攜式鍵盤(選配，KP-200)LCD 因國　的不同而顯示所需的字元
    This command orients the keyboard for use in different countries via defining special characters on the KP-200 series portable LCD keyboard (option).
    COUNTRY n
    
    參數:
    n - 001: USA
    002: Canadian-French
    003: Spanish (Latin America)
    031: Dutch
    032: Belgian
    033: French (France)
    034: Spanish (Spain)
    036: Hungarian
    038: Yugoslavian
    039: Italian
    041: Switzerland
    042: Slovak
    044: United Kingdom
    045: Danish
    046: Swedish
    047: Norwegian
    048: Polish
    049: German
    055: Brazil
    061: English (International)
    351: Portuguese
    358: Finnish
    
    返回:
    byte[]
  - codePage
```
public static byte[] codePage(java.lang.String n)
```
    該指令用於定義可攜式鍵盤(選配，KP-200)每個字母按鍵所對應的國際字元集
    CODEPAGE n
    
    參數:
    n - 字元集的名字或代表號，可進一步區分為 7-bit 或 8-bit
    \
    
    返回:
    byte[]
  - cls
```
public static byte[] cls()
```
    該指令用於清除影像緩衝區(image buffer)的資料
    This command clears the image buffer.
    CLS
    
    返回:
    byte[]
  - feed
```
public static byte[] feed(int n)
```
    該指令用於控制進紙的距離，以點(dot)表示
    This command feeds label with the specified length. The length is specified by dot
    FEED n
    
    參數:
    n - unit: dot
    1 ≤ n ≤ 9999
    
    返回:
    byte[]
  - backFeed
```
public static byte[] backFeed(int n)
```
    This command feeds the label in reverse. The length is specified by dot
    BACKFEED n
    
    參數:
    n - unit: dot,1 ≤ n ≤ 9999
    
    返回:
    byte[]
  - formFeed
```
public static byte[] formFeed()
```
    該指令可命令打印機進一張紙
    This command feeds label to the beginning of next label
    
    返回:
    byte[]
  - home
```
public static byte[] home()
```
    一般開機後打印第一張標籤時，打印位置都會不準確，打印第二張標籤時打印位置就會正確，若要開機後第一張標籤就要打印在正確的位置，可使用該指令
    This command will feed label until the internal sensor has determined the origin. Size and gap of the label should be defined before using this command.
    HOME
    
    返回:
    byte[]
  - print
```
public static byte[] print(int m,
           int n)
```
    該指令用於打印出儲存於影像緩衝區　的資料
    This command prints the label format currently stored in the image buffer.
    PRINT m [,n]
    
    參數:
    m - Specifies how many sets of labels will be printed.1 ≤ m ≤ 999999999
    n - Specifies how many copies should be printed for each particular label set.1 ≤ n ≤ 999999999
    
    返回:
    byte[]
  - print
```
public static byte[] print(int m)
```
    該指令用於打印出儲存於影像緩衝區　的資料
    This command prints the label format currently stored in the image buffer.
    PRINT m [,n]
    
    參數:
    m - Specifies how many sets of labels will be printed.1 ≤ m ≤ 999999999
    n - Specifies how many copies should be printed for each particular label set.1 ≤ n ≤ 999999999
    
    返回:
    byte[]
  - sound
```
public static byte[] sound(int level,
           int interval)
```
    該指令用於控制蜂鳴器的頻率，可設定 10 階的聲音，每階聲因的長短由第二個參數控制
    This command controls the sound frequency of the beeper. There are 10 levels of sounds. The timingcontrol can be set by the “interval” parameter.
    SOUND level,interval
    
    參數:
    level - Sound level: 0~9
    interval - Sound interval: 1~4095
    
    返回:
    byte[]
  - cut
```
public static byte[] cut()
```
    使用該指令時，打印機將立即裁切
    This command activates the cutter to immediately cut the labels without back feeding the label.
    CUT
    
    返回:
    byte[]
  - limitFeedByinch
```
public static byte[] limitFeedByinch(double n)
```
    該指令用於設定打印機進紙時，若經過所設定的長度仍無法偵測到垂直間距，則打印機發生錯誤，停止進紙
    LIMITFEED n
    
    參數:
    n - 可使用英寸或公釐
    
    返回:
    byte[]
  - limitFeedBymm
```
public static byte[] limitFeedBymm(double n)
```
    該指令用於設定打印機進紙時，若經過所設定的長度仍無法偵測到垂直間距，則打印機發生錯誤，停止進紙
    LIMITFEED n
    
    參數:
    n - 可使用英寸或公釐
    
    返回:
    byte[]
  - limitFeedBydot
```
public static byte[] limitFeedBydot(int n)
```
    該指令用於設定打印機進紙時，若經過所設定的長度仍無法偵測到垂直間距，則打印機發生錯誤，停止進紙
    LIMITFEED n
    
    參數:
    n - 可使用英寸或公釐
    
    返回:
    byte[]
  - selfTest
```
public static byte[] selfTest()
```
    At this command, the printer will print out the printer information
    SELFTEST [page]
    
    返回:
    byte[]
  - selfTest
```
public static byte[] selfTest(java.lang.String page)
```
    At this command, the printer will print out the printer information
    SELFTEST [page]
    
    參數:
    page - omitted: Print a self-test page with whole printer information.
    PATTERN: Print a pattern to check the status of print head heat line.
    ETHERNET: Print a self-test page with Ethernet settings.
    WLAN: Print a self-test page with Wi-Fi settings.
    RS232: Print a self-test page with RS-232 settings.
    SYSTEM: Print a self-test page with printer settings.
    Z: Print a self-test page with emulated language settings.
    
    返回:
    byte[]
  - eoj
```
public static byte[] eoj()
```
    Let the printer wait until process of commands (before EOJ) be finished then go on the next command.
    EOJ
    This command has been supported since V6.39 EZ and later firmware.
    
    返回:
    byte[]
  - delay
```
public static byte[] delay(int ms)
```
    Let the printer wait specific period of time then go on next command.
    DELAY ms
    
    參數:
    ms - The specific period of time. Unit is millisecond. 1000 ms = 1 second
    
    返回:
    byte[]
  - disPlay
```
public static byte[] disPlay(java.lang.String s)
```
    This command can show the image, which is in printer’s image buffer, on LCD panel
    DISPLAY IMAGE/OFF
    
    參數:
    s - IMAGE Show the image in printer’s image buffer on LCD panel.
    OFF Disable this function.
    
    返回:
    byte[]
  - initialPrinter
```
public static byte[] initialPrinter()
```
    This command can restore printer settings to defaults.
    INITIALPRINTER
    
    返回:
    byte[]
  - bar
```
public static byte[] bar(int x,
         int y,
         int width,
         int heigth)
```
    在標籤上畫線
    This command draws a bar on the label format.
    BAR x,y,width,height
    
    參數:
    x - The upper left corner x-coordinate (in dots)
    y - The upper left corner y-coordinate (in dots)
    width - Bar width (in dots)
    height - Bar height (in dots)
    
    返回:
    byte[]
  - barCode
```
public static byte[] barCode(int x,
             int y,
             java.lang.String codeType,
             int heigth,
             int human,
             int rotation,
             int narrow,
             int wide,
             java.lang.String content)
```
    該指令用來畫一維條螞，共計 23 種
    詳細注解請查看編程手冊
    This command prints 1D barcodes. The available barcodes are listed below:
    BARCODE X,Y,”codetype”,height,humanreadable,rotation,narrow,wide,[alignment,]”content “
    
    返回:
    byte[]
  - bitmap
```
public static byte[] bitmap(int x,
            int y,
            int mode,
            Bitmap bitmap,
            BitmapToByteData.BmpType bmpType)
```
    該指令用於在標籤上繪製點陣圖(非 BMP 格式圖檔)
    This command draws bitmap images (as opposed to BMP graphic files).
    BITMAP X,Y,width,height,mode,bitmap data…
    
    參數:
    x - Specify the x-coordinate
    y - Specify the y-coordinate
    width - Image width (in bytes)
    height - Image height (in dots)
    mode - Graphic modes listed below:
    0: OVERWRITE
    1: OR
    2: XOR
    bitmap - data Bitmap data
    bmpType - 圖片處理類型
    
    返回:
    byte[]
  - box
```
public static byte[] box(int x,
         int y,
         int x_end,
         int y_end,
         int thickness)
```
    該指令用于在標簽上繪制矩形
    This command draws rectangles on the labe
    BOX x,y,x_end,y_end,line thickness[,radius]
    詳細介紹請參考編程手冊
    
    參數:
    x - Specify x-coordinate of upper left corner (in dots)
    y - Specify y-coordinate of upper left corner (in dots)
    x_end - Specify x-coordinate of lower right corner (in dots)
    y_end - Specify y-coordinate of lower right corner (in dots)
    line - thickness Line thickness (in dots)
    radius - Optional. Specify the round corner. Default is 0.
    thickness -
    
    返回:
    byte[]
  - ellipse
```
public static byte[] ellipse(int x,
             int y,
             int width,
             int height,
             int thickness)
```
    This command draws an ellipse on the label.
    ELLIPSE x,y,width,height,thickness
    
    參數:
    x - Specify x-coordinate of upper left corner (in dots)
    y - Specify y-coordinate of upper left corner (in dots)
    width - Specify the width of the ellipse (in dots)
    height - Specify the height of the ellipse (in dots)
    thickness - Thickness of the ellipse (in dots)
    
    返回:
    byte[]
  - codeBlockFMode
```
public static byte[] codeBlockFMode(int x,
                    int y,
                    int rotation,
                    int row_height,
                    int module_width,
                    java.lang.String content)
```
    This command draws CODABLOCK F mode barcode.
    CODABLOCK x,y,rotation,[row height,]module width,]”content”
    
    參數:
    x - Specify the x-coordinate
    y - Specify the y-coordinate
    rotation - 0 : No rotation
    90 : Rotate 90 degrees clockwise
    180 : Rotate 180 degrees clockwise
    270 : Rotate 270 degrees clockwise
    row_height - The height of individual row equals to row height x module width (Default is 8)
    module_width - Width of narrow element of CODABLOCK in dots (Default is 2)
    content - content of CODABLOCK bar code
    
    返回:
    byte[]
  - dmatrix
```
public static byte[] dmatrix(int x,
             int y,
             int width,
             int height,
             int xm,
             int row,
             int col,
             java.lang.String expression,
             java.lang.String content)
```
    該指令用來繪製 DataMatrix 二維條碼
    DMATRIX x, y, width, height, [xm, row, col], expression
    
    參數:
    x - 條碼水平方向啟始位置，以點(dot)表示
    y - 條碼垂直方向啟始位置，以點(dot)表示
    width - 條碼寬度，以點(dot)表示
    height - 條碼高度，以點(dot)表示
    xm - 模組尺寸，以點(dot)表示
    row - 條碼列數 Symbol size of row: 10 to 144
    col - 條碼欄數 Symbol size of col: 10 to 144
    expression -
    content - Content of DataMatrix 2D bar code
    
    返回:
    byte[]
  - dmatrix
```
public static byte[] dmatrix(int x,
             int y,
             int width,
             int height,
             java.lang.String expression,
             java.lang.String content)
```
  - erase
```
public static byte[] erase(int x,
           int y,
           int width,
           int height)
```
    該指令用於　除影像緩衝區　部份區域的資料
    This command clears a specified region in the image buffer.
    
    參數:
    x - The x-coordinate of the starting point (in dots)
    y - The y-coordinate of the starting point (in dots)
    x_width - The region width in x-axis direction (in dots)
    y_height - The region height in y-axis direction (in dots)
    
    返回:
    byte[]
  - pdf417
```
public static byte[] pdf417(int x,
            int y,
            int width,
            int height,
            int rotate,
            java.lang.String option,
            java.lang.String content)
```
    該指令用來打印 PDF417 二維條碼
    This command defines a PDF417 2D bar code.
    PDF417 x,y,width,height,rotate,[option],”content”
    
    參數:
    x - X-coordinate of starting point (in dot)
    y - Y-coordinate of starting point (in dot)
    width - Expected width (in dots)
    height - Expected height (in dots)
    rotate - Rotation counterclockwise
    0 : No rotation
    90 : Rotate 90 degrees
    180 : Rotate 180 degrees
    270 : Rotate 270 degrees
    option - 參數請查看編程手冊，設置多個以，隔開，例如"E4,W4,T1";
    content - Content of PDF417 2D bar code
    
    返回:
    byte[]
  - putBmp
```
public static byte[] putBmp(int x,
            int y,
            java.lang.String filename,
            int bpp,
            int contrast)
```
    This command prints BMP format images. The grayscale printing is for direct thermal mode only.
    Support 1-bit (monochrome) and 8-bit (256-color) BMP graphic only.
    PUTBMP x,y,”filename”[, bpp][, contract]
    
    參數:
    x - The x-coordinate of the BMP format image
    y - The y-coordinate of the BMP format image
    filename - The downloaded BMP filename
    bpp - Optional. Bits per pixel of grayscale graphic. Default is 1. *Since V6.91EZ.
    1: 1-bit (monochrome) graphic
    8: 8-bit (256-color) graphic
    contrast - Optional. Contrast of grayscale graphic. Default is 80. Suggested range is
    from 60 to 100. *Since V6.91EZ.
    
    返回:
    byte[]
  - putBmp
```
public static byte[] putBmp(int x,
            int y,
            java.lang.String filename)
```
    This command prints BMP format images. The grayscale printing is for direct thermal mode only.
    Support 1-bit (monochrome) and 8-bit (256-color) BMP graphic only.
    PUTBMP x,y,”filename”[, bpp][, contract]
    
    參數:
    x - The x-coordinate of the BMP format image
    y - The y-coordinate of the BMP format image
    filename - The downloaded BMP filename
    bpp - Optional. Bits per pixel of grayscale graphic. Default is 1. *Since V6.91EZ.
    1: 1-bit (monochrome) graphic
    8: 8-bit (256-color) graphic
    contrast - Optional. Contrast of grayscale graphic. Default is 80. Suggested range is
    from 60 to 100. *Since V6.91EZ.
    
    返回:
    byte[]
  - putpcx
```
public static byte[] putpcx(int x,
            int y,
            java.lang.String filename)
```
    This command prints PCX format images. TSPL language supports 2-color PCX format graphics. TSPL2 language supports 256-color PCX format graphics.
    PUTPCX x,y,”filename”
    
    參數:
    x - The x-coordinate of the BMP format image
    y - The y-coordinate of the BMP format image
    filename - The downloaded pcx filename
    
    返回:
    byte[]
  - qrCode
```
public static byte[] qrCode(int x,
            int y,
            java.lang.String eccLevel,
            int cellWidth,
            java.lang.String mode,
            int rotation,
            java.lang.String model,
            java.lang.String mask,
            java.lang.String content)
```
    This command prints QR code.
    QRCODE x,y,ECC Level,cell width,mode,rotation,[model,mask,]”content”
    
    參數:
    x - The upper left corner x-coordinate of the QR code
    y - The upper left corner y-coordinate of the QR code
    eccLevel - Error correction recovery level
    L : 7%
    M : 15%
    Q : 25%
    H : 30%
    cellWidth - 1~10
    mode - Auto / manual encode
    A : Auto
    M : Manual
    rotation - 0 :
    0 degree
    90 : 90 degree
    180 : 180 degree
    270 : 270 degree
    model - M1: (default), original version
    M2: enhanced version (Almost smart phone is supported by this version.)
    mask - S0~S8, default is S7
    content - The encodable character set is described as below,
  - qrCode
```
public static byte[] qrCode(int x,
            int y,
            java.lang.String eccLevel,
            int cellWidth,
            java.lang.String mode,
            int rotation,
            java.lang.String content)
```
    This command prints QR code.
    QRCODE x,y,ECC Level,cell width,mode,rotation,[model,mask,]”content”
    
    參數:
    x - The upper left corner x-coordinate of the QR code
    y - The upper left corner y-coordinate of the QR code
    eccLevel - Error correction recovery level
    L : 7%
    M : 15%
    Q : 25%
    H : 30%
    cellWidth - 1~10
    mode - Auto / manual encode
    A : Auto
    M : Manual
    rotation - 0 :
    0 degree
    90 : 90 degree
    180 : 180 degree
    270 : 270 degree
    model - M1: (default), original version
    M2: enhanced version (Almost smart phone is supported by this version.)
    mask - S0~S8, default is S7
    content - The encodable character set is described as below,
    
    返回:
    byte[]
  - reverse
```
public static byte[] reverse(int x,
             int y,
             int width,
             int height)
```
    This command reverses a region in image buffer.
    將指定的區域反相打印
    REVERSE x_start,y_start,x_width,y_height
    
    參數:
    x - The x-coordinate of the starting point (in dots)
    y - The y-coordinate of the starting point (in dots)
    width - X-axis region width (in dots)
    height - Y-axis region height (in dots)
    
    返回:
    byte[]
  - text
```
public static byte[] text(int x,
          int y,
          java.lang.String font,
          int rotation,
          int x_multiplication,
          int y_multiplication,
          java.lang.String content)
```
    This command prints text on label.
    使用打印機　置文字(英數)打印文字
    TEXT x,y,”font”,rotation,x-multiplication,y-multiplication,”content”
    
    參數:
    x - The x-coordinate of the text
    y - The y-coordinate of the text
    font - Font name請參考編程手冊
    rotation - The rotation angle of text
    0 : No rotation
    90 : degrees, in clockwise direction
    180 : degrees, in clockwise direction
    270 : degrees, in clockwise direction
    x_multiplication - Horizontal multiplication, up to 10x
    y_multiplication - Vertical multiplication, up to 10x
    content - Content of text string
    
    返回:
    byte[]
  - block
```
public static byte[] block(int x,
           int y,
           int width,
           int height,
           java.lang.String font,
           int rotation,
           int x_multiplication,
           int y_multiplication,
           int space,
           int alignment,
           java.lang.String content)
```
    This command prints paragraph on label.
    BLOCK x,y,width,height,”font”,rotation,x-multiplication,y-multiplication,[space,]alignment,]“content”
    
    參數:
    x - The x-coordinate of the text
    y - The y-coordinate of the text
    width - The width of block for the paragraph in dots
    height - The height of block for the paragraph in dots
    font - Font name
    rotation - The rotation angle of text
    0 : No rotation
    90 : degrees, in clockwise direction
    180 : degrees, in clockwise direction
    270 : degrees, in clockwise direction
    x_multiplication - Horizontal multiplication, up to 10x
    y_multiplication - Vertical multiplication, up to 10x
    space - Add or delete the space between lines in dot.
    alignment - Text alignment. 0 : default (Left);1 : Left;2 : Center; 3 : Right
    content - Data in block. The maximum data length is 4092 bytes.
    
    返回:
    byte[]
  - block
```
public static byte[] block(int x,
           int y,
           int width,
           int height,
           java.lang.String font,
           int rotation,
           int x_multiplication,
           int y_multiplication,
           java.lang.String content)
```
    This command prints paragraph on label.
    BLOCK x,y,width,height,”font”,rotation,x-multiplication,y-multiplication,“content”
    
    參數:
    x - The x-coordinate of the text
    y - The y-coordinate of the text
    width - The width of block for the paragraph in dots
    height - The height of block for the paragraph in dots
    font - Font name
    rotation - The rotation angle of text
    0 : No rotation
    90 : degrees, in clockwise direction
    180 : degrees, in clockwise direction
    270 : degrees, in clockwise direction
    x_multiplication - Horizontal multiplication, up to 10x
    y_multiplication - Vertical multiplication, up to 10x
    space - Add or delete the space between lines in dot.
    alignment - Text alignment. 0 : default (Left);1 : Left;2 : Center; 3 : Right
    content - Data in block. The maximum data length is 4092 bytes.
  - checkPrinterStateByPort9100
```
public static byte[] checkPrinterStateByPort9100()
```
    This command obtains the printer status at any time, even in the event of printer error. An inquiry
    request is solicited by sending an (ASCII 27, escape character) as the beginning control character
    to the printer. A one byte character is returned, flagging the printer status. A 0 signifies the printer is
    ready to print labels.
    < ESC >!?
    此指令使用于9100端口，發一次，每當打印機狀態改變，就有數據返回
  - checkPrinterStateByPort4000
```
public static byte[] checkPrinterStateByPort4000()
```
    此指令使用于4000端口，發一次，打印機返回一次代表狀態的數據
    
    返回:
    byte[]
  - downLoad
```
public static byte[] downLoad(java.lang.String filename)
```
    Download 程序文檔
    DOWNLOAD ”EXAMPLE.BAS”
    
    參數:
    filename - FILENAME The name of data file that will remain resident in the printer memory
    
    返回:
    byte[]
  - downLoad
```
public static byte[] downLoad(java.lang.String filename,
              int size,
              java.lang.String content)
```
    Download 文本文檔
    DOWNLOAD ”FILENAME” ,DATA SIZE,DATA　CONTENT...
    
    參數:
    filename - FILENAME The name of data file that will remain resident in the printer memory
    size - 文本大小
    content - 字符串content為要存儲到打印機的文本內容
    
    返回:
    byte[]
  - downLoad
```
public static byte[] downLoad(java.lang.String filename,
              java.lang.String filepath)
```
    Download 文本文件
    DOWNLOAD ”FILENAME” ,FILE SIZE,DATA　CONTENT...
    
    參數:
    filename - FILENAME The name of data file that will remain resident in the printer memory
    filepath - filepath要存儲到打印機內存的文本文件的文件路徑
    
    返回:
    byte[]
  - downLoad
```
public static byte[] downLoad(java.lang.String filename,
              Bitmap bitmap)
```
    Download 圖檔
    DOWNLOAD ”FILENAME.PCX” ,FILE SIZE,DATA　CONTENT...
    
    參數:
    filename - FILENAME The name of data file that will remain resident in the printer memory
    bitmap - 要存儲到打印機內存的圖像文件的bitmap對象,必需是單色圖
    
    返回:
    byte[]
  - eop
```
public static byte[] eop()
```
    End of program. To declare the start and end of BASIC language commands used in a program, DOWNLOAD “FILENAME.BAS “ must be added in the first line of the program, and “EOP “ statement at the last line of program.
    EOP
    
    返回:
    byte[]
  - files
```
public static byte[] files()
```
    This command prints out the total memory size, available memory size and files lists (or lists the files through RS-232) in the printer memory (both FLASH memory and DRAM).
    FILES
    
    返回:
    byte[]
  - kill
```
public static byte[] kill(java.lang.String filename)
```
    This command deletes a file in the printer memory. The wild card (*) will delete all files resident in specified DRAM or FLASH memory.
    KILL ”FILENAME”
    
    參數:
    filename - The name of data file that will delete in the printer memory (case sensitive)
    
    返回:
    byte[]
  - move
```
public static byte[] move()
```
    This command moves downloaded files from DRAM to FLASH memory.
    MOVE
    
    返回:
    byte[]
  - run
```
public static byte[] run(java.lang.String filename)
```
    This command executes a program resident in the printer memory. It is available for TSPL2 language printers only.
    RUN “FILENAME.BAS”
    This command can be replaced to filename that without typing “.BAS”.
    
    參數:
    filename - 打印機內存中的文件名稱
    
    返回:
    byte[]

国产午夜亚洲精品一级在线/热国产热综合/国产精品页/91久久国产综合 - 国产精品区一区二区三在线播放

類 DataForSendToPrinterTSC

構造器概要

方法概要

從類繼承的方法 java.lang.Object

構造器詳細資料

DataForSendToPrinterTSC

方法詳細資料

setCharsetName

sizeBymm

sizeByinch

sizeBydot

gapByinch

gapBymm

gapBydot

gapDetect

gapDetect

blineDetect

autoDetect

blineByinch

blineBymm

blineBydot

offSetByinch

offSetBymm

offSetBydot

speed

density

direction

reference

shift

country

codePage

cls

feed

backFeed

formFeed

home

print

print

sound

cut

limitFeedByinch

limitFeedBymm

limitFeedBydot

selfTest

selfTest

eoj

delay

disPlay

initialPrinter

bar

barCode

bitmap

box

ellipse

codeBlockFMode

dmatrix

dmatrix

erase

pdf417

putBmp

putBmp

putpcx

qrCode

qrCode

reverse

text

block

block

checkPrinterStateByPort9100

checkPrinterStateByPort4000

downLoad

downLoad

downLoad

downLoad

eop

files

kill

move

run